chromiumos/platform/ec.git
2013-08-24 Vic YangRemove unused test config 42/66742/2 master
2013-08-24 Andrew Brestickerpit: Disable CONFIG_HOST_COMMAND_STATUS 28/66828/2
2013-08-24 Andrew BrestickerDon't send IN_PROGRESS response if GET_COMMS_STATUS... 27/66827/2
2013-08-24 Aaron Durbinbolt: workaround board sequencing deficiencies 21/66821/2
2013-08-24 Aaron Durbinbolt: add board support to flash_ec 20/66820/2
2013-08-23 Bill RichardsonFalco: throttle if battery current drain is too high 84/66684/3
2013-08-23 Bill RichardsonCompletely new thermal/fan implementation 88/66688/2
2013-08-22 Vic YangFix a bug that I2C error may cause incorrect LED color 14/66314/2
2013-08-22 Bill RichardsonLock BOOTCFG to safe values for all LM4s 38/66538/2
2013-08-22 Dave ParkerRemove default values for undefined tasks from charge... 66/66466/2
2013-08-21 Jeremy Thorpekirby: Add kirby support to util/flash_ec. 05/66005/2
2013-08-21 David HuangChange peppy battery led error blink timing 91/63891/6
2013-08-20 Aaron Durbinfalco: delay backlight enable by 420ms 38/66238/4
2013-08-18 Vic YangAdd test for console command history 37/64837/3
2013-08-17 Doug Andersonpit: Only enable FET4 by default at cold reset 27/66127/2
2013-08-13 Dave ParkerPoll and cache g781 temperature values 97/65597/3
2013-08-13 Dave ParkerAdd fan power enable GPIO for Peppy 74/65674/3
2013-08-13 Dave ParkerRemove board 'wolf' from master/ToT branch. 14/65514/2 release-R30-4537.B
2013-08-09 Bill RichardsonAdd abstract "cond_t" type to detect state transitions. 71/65071/5
2013-08-09 Bill RichardsonHaswell: shutdown directly to G3 without pausing in S5 36/65336/3
2013-08-09 Randall SpanglerHide battery vendor params override behind config option 57/65257/2
2013-08-09 Dave ParkerConsole command for g781 temperature sensor. 34/65234/3
2013-08-09 Randall SpanglerFix leaving keyboard scanning disabled on brief power... 38/65238/2
2013-08-09 Randall Spanglerpit: leave 1.35V rail on during warm reboot 27/65227/2
2013-08-09 Hsu HenryUpdate Wolf from Slippy. 72/63872/7
2013-08-08 Randall Spanglerpit: If flash registers are disabled all blocks are... 80/64980/2
2013-08-08 Randall SpanglerPut knowledge of task-config dependency in config.h 10/65010/3
2013-08-08 Randall Spanglerdaisy: remove I2C port detection 58/64958/4
2013-08-08 Shawn Nematbakhshconsole_output: Add commands for saving / restoring... 08/65208/2
2013-08-08 Bill RichardsonUse macros for C <-> K conversions 05/65005/2
2013-08-07 Shawn Nematbakhshectool: Return non-success exit code on bad EC status. 86/64686/3
2013-08-07 Dave ParkerPeppy ectool led command 27/64627/6
2013-08-07 Randall SpanglerClean up configuring GPIO alternate functions 00/64400/6
2013-08-07 Randall Spanglerstm32f: Don't glitch signal when setting GPIO_PULL_UP 19/64719/4
2013-08-06 Vic YangMinor fixes for Kirby board.h 11/64811/2 stabilize-4512.B
2013-08-06 Randall Spanglerpit: Don't configure PB3 in alternate function mode 14/64714/2
2013-08-06 Randall Spanglersnow: Remove remnants of partial SPI support 12/64712/2
2013-08-06 Randall SpanglerClean up SPI state machine and add state codes 54/64254/3
2013-08-06 Simran BasiServo V3: Add jtag config for V3 70/64370/3
2013-08-04 Vic YangAdd kirby board 64/64364/2
2013-08-04 Vic YangRemove proxy config flags for unit tests 67/64367/2
2013-08-03 Randall SpanglerMove onewire bus support from chip/lm4 to common 76/64376/3
2013-08-03 Randall Spanglerx86: use charge state hook to wake up power button... 66/64366/2
2013-08-03 Randall SpanglerChange one-wire bus to use normal gpio interface 75/64375/3
2013-08-03 Randall SpanglerMove input character processing from UART interrupt... 63/64363/2
2013-08-03 Randall SpanglerRemove unneeded includes of registers.h 82/64382/2
2013-08-02 Randall SpanglerHost commands don't set the response pointer 36/64236/3
2013-08-02 Dave ParkerFalco: Stop charging after a timeout of 10 hours 09/64309/3
2013-08-02 Dave ParkerTrack the duration of each charge/discharge state. 80/64280/4
2013-08-02 Vic YangPass command line arguments to make from make_all.sh 68/64268/4
2013-08-02 Randall SpanglerFix documentation for lid change and power button hooks 58/64258/2
2013-08-02 Vic Yangspring: Shorten delay for charger redetect 77/64277/2
2013-08-02 Vic Yangspring: Allow a minimum 100mA current input 76/64276/2
2013-08-02 Vic Yangspring: Always pull 500mA before charger type is determined 75/64275/2
2013-08-02 Vic Yangspring: Show yellow LED for battery not fully charged... 74/64274/2
2013-08-02 Vic Yangspring: Increase CABLE_DET voltage threshold 73/64273/2
2013-08-02 Vic Yangspring: Ignore battery assist mode when deciding LED... 72/64272/2
2013-08-02 Vincent PalatinRevert "spring: always enable the PP3300_WWAN rail" 71/64271/2
2013-08-01 Randall SpanglerWord-align the host memory map 33/64233/2
2013-08-01 Dave ParkerAdd hook for changes in the charge state machine 37/63537/3
2013-08-01 Aaron Durbinbolt: force SYS_PWROK and PP3300_DSW_GATED_EN to 0... 45/63845/2
2013-07-31 Bill RichardsonAbstract polite AP throttling into a function 09/63909/2
2013-07-31 Bill RichardsonAdd build-time checks on board-specific array sizes. 33/63833/3
2013-07-31 Dave ParkerAdd led_slippy build rule back to common/build.mk 86/63886/2
2013-07-29 Rong ChangAdd PMU powerinfo host command and console command 50/63350/6
2013-07-26 Aaron Durbinectool: fix console command 45/63445/4 factory-pit-4471.B
2013-07-26 Bill RichardsonAdd new hostevents to ask the AP to throttle itself 79/63379/3
2013-07-26 Randall SpanglerPulse EC_ENTERING_RW instead of just leaving it high 33/62133/2
2013-07-25 Bill RichardsonAdd turbo mode charger support, and tests for it. 72/63372/3
2013-07-25 Bill RichardsonChange macro names used for test configurations 71/63371/2
2013-07-25 Randall SpanglerAdd descriptions for lots of config options 81/63281/2
2013-07-25 Randall SpanglerClean up onewire config options 73/63273/2
2013-07-25 Randall SpanglerClean up more config options - FMAP, etc. 71/63271/2
2013-07-25 Randall SpanglerClean up more config options 48/63248/3
2013-07-24 Randall SpanglerClean up and document UART config options 44/63244/3
2013-07-24 Vic YangSupport emulator hibernate 70/62970/2
2013-07-24 Vic YangReboot emulator with execv() 69/62969/2
2013-07-24 Rong ChangCollect board X specific files into build.mk common... 11/63211/4
2013-07-24 Randall SpanglerStandardize concatenation macros 31/63231/3
2013-07-24 Randall SpanglerAdd a script to build all platforms and run host-based... 30/63230/2
2013-07-24 Rong ChangMove TPSChrome charging temperature range to battery... 78/62978/7
2013-07-24 Aaron Durbinbolt: add prelimnary support 10/62210/4
2013-07-24 Aaron Durbinx86: build chipset_x86_common.o conditionally 08/63208/2
2013-07-24 Randall SpanglerClean up and document more config options 45/63145/2
2013-07-24 Vic YangLessen timing constraints in hooks test 44/63144/2
2013-07-24 Randall SpanglerClean up and document keyboard config options 09/63109/2
2013-07-24 Randall SpanglerClean up debug config options 02/63102/2
2013-07-24 Louis Yung... Fixed two i8042 bugs. 86/62986/2
2013-07-23 Vic YangFix reset flags and sysjump time for emulator 58/62958/3
2013-07-23 Vic YangTest power button in kb_8042 test 55/62955/2
2013-07-23 Vic YangTest sysjump tag in kb_8042 test 08/62908/4
2013-07-23 Randall SpanglerClean up and document PMU config options 06/62906/3
2013-07-23 Randall SpanglerClean up and document battery config options 73/62673/5
2013-07-23 Randall SpanglerClean up charger config options 40/62540/6
2013-07-23 Dave ParkerAdd ectool chargecontrol discharge command for Slippy 51/62851/3 stabilize-4443.B
2013-07-22 Vic YangAdd system_common unit test 55/62855/2
2013-07-22 Dave ParkerSlippy: Detect physical presence of battery before... 50/62850/2
2013-07-22 Dave ParkerSet Slippy write protect to active low 49/62849/2
2013-07-22 Dave ParkerBasic G781 temp sensor support for Slippy 47/62847/2
2013-07-22 Dave ParkerBattery LED control for Slippy 48/62848/2
next