chromiumos/third_party/hdctools.git
2013-08-19 Dave ParkerWolf: Add servo overlay. 01/66201/2 master
2013-08-18 Shawn Nematbakhshservo: ec: Modify limit_channel to use new EC commands. 40/65340/3
2013-08-08 Simran BasiServo V3: Add version specific interface to params 69/64969/3 release-R30-4537.B
2013-08-07 Simran BasiServo V3: Pipe servo board version to servo_server 35/64835/3
2013-08-06 Simran BasiServo V3: Remap fw_wp to gpio. 03/64803/4 stabilize-4512.B
2013-08-06 Simran BasiServo V3: Use I2C-2 by default. 11/63311/2
2013-08-05 Simran BasiServo V3: Fix error message formatting. 83/64383/2
2013-07-25 Simran BasiServo V3: Add Init Values to GPIO's 80/63280/3 factory-4455.B factory-pit-4471.B firmware-pit-4482.B
2013-07-24 Vadim BendeburyDo not proceed if board XML file is not found 37/62737/6
2013-07-24 Todd Brochservod: stout: Add board overlay. 54/63054/3
2013-07-22 Vadim BendeburyAdd board file for peach_pit 60/62760/3 stabilize-4443.B
2013-07-17 Vadim BendeburySupport rec_mode for ARM platforms 08/61808/6
2013-07-15 Vadim BendeburySort arm ec controls and driver modules in alphanumerically 07/61807/2
2013-07-10 Simran BasiServo: Fix clobber_ok usage. 30/61330/3 factory-pit-4390.B firmware-falco_peppy-4389.B firmware-leon-4389.26.B
2013-07-09 Dave Parkerservod: peppy: Add ADCs for power measurement. 84/60884/2
2013-06-24 Fang Deng[hdctools] power cycle USB when switching usb_mux_sel1... 55/59355/7 release-R29-4319.B
2013-06-24 Sameer Nandaservod: falco: Add ADCs for power measurement. 47/59647/3
2013-06-21 Tom Wai-Hong TamExcept the EOF exception when flushing PTY 03/59403/2
2013-06-21 Shawn Nematbakhshpeppy: Add servo overlay. 85/59485/2
2013-06-20 Simran BasiServo V3: Autodetect Servo V3 boards. 54/59454/2
2013-06-19 Simran BasiServo V3: Implement Beaglebone Uart 69/57269/6
2013-06-17 Gediminas RamanauskasAdding falco servo overlay. 78/58878/2 factory-4290.B stabilize-4287.B
2013-06-13 Gediminas RamanauskasRefactoring common x86 Chrome EC code to its own xml. 69/57469/3 factory-pit-4280.B
2013-06-03 J. Richard... Fix handling of shell special characters in beaglebone... 83/57183/3 factory-spring-4262.B stabilize-4255.B
2013-05-23 Tom Wai-Hong TamEnable UART capturing on EC interface 62/55762/5
2013-05-22 Simran BasiServo V3: Implement Beaglebone GPIO. 71/49671/12
2013-05-22 Todd Brochservod: Add sid for next batch of servo V2 02/56202/2
2013-05-22 Simran Basiservod: Add servo V3 GPIO controls. 33/49133/3
2013-05-22 Vic YangUse list to store kbd_en and kbd_mx_ax states 39/56139/2
2013-05-20 Doug Andersonhdctools: servod: Add jtag1800_external 93/47193/4
2013-05-14 Yusuf MohsinallySet debug output for servod on beaglebones. 81/51081/3 factory-spring-4131.B
2013-05-13 Jay KimAdd slippy board file for servod config 31/50931/3 factory-4128.B
2013-05-11 Vadim BendeburyDo not fail servod if the default port is not available 74/49374/4
2013-05-08 Todd Brochservod: pit: Add ADCs for power measurement. 17/50017/2
2013-04-26 Gediminas RamanauskasGiving Parrot a little bit of time to process rec_mode... 78/49278/3 release-R28-4100.B stabilize-4068.0.B stabilize-4100.38.B stabilize-spring-4100.53.B toolchainB
2013-04-25 Simran BasiServo: Implement i2c for servo_v3 89/49089/2
2013-04-24 Todd BrochRevert "Servo: Implement i2c for servo_v3" 55/49055/2
2013-04-23 Todd Brochservod: Add servo V3 i2c controls. 52/48152/4
2013-04-23 Simran BasiServo: Implement i2c for servo_v3 43/47943/9
2013-04-23 Todd Brochservod: Allow dut board name aliases. 94/48794/3
2013-04-20 Todd Brochservod: mimic flex: change to allow either pca9500... 31/48531/7 stabilize-4035.0.B
2013-04-18 Yunlian Jianghdctools: fix unmatched pragma diagnostic pop 30/48430/2
2013-04-13 J. Richard... Make Stumpy rec_mode just like Alex rec_mode. 55/48055/3 stabilize-4008.0.B
2013-04-12 Vincent PalatinAdd support for Toad GPIOs in servod 20/47920/4
2013-04-12 Vincent Palatinservod: add support for open-drain GPIOs 90/47990/3
2013-04-12 Vincent PalatinAdd support for FT230X 19/47919/3
2013-04-12 Vincent PalatinAdd basic Toad cable support in servod 18/47918/3
2013-04-11 Todd Brochhdctools: Allow either libftdi or libftdi1 usage. 66/45966/8
2013-04-10 Todd BrochRefactor common ARM EC related controls. 20/45320/2
2013-04-10 Yunlian JiangFix clang assign a variable to itself warning 59/47659/3
2013-03-29 Todd Brochclient: refactor ServoClientError to suggest controls. 18/46818/2
2013-03-29 Todd Brochservod: Add aliases for fw_up to t20_rec. 28/46828/2
2013-03-27 Todd Brochdut-control: bugfix for statistic calculations. 40/46540/3
2013-03-26 Todd Brochparrot: bugfix to make rec_mode work. 17/46517/2 release-R27-3912.B stabilize-3912.79.B toolchainA
2013-03-25 Todd Brochservod: Send multiple controls in one connection to... 09/46309/2
2013-03-22 J. Richard... Handle beaglebone deploy when /etc/default/servod is... 52/46152/3
2013-03-21 J. Richard... Log version information in the beaglebone servod upstar... 91/46091/3
2013-03-21 Todd Brochservod: Refactor libftdi inclusion. 65/45965/3
2013-03-21 Todd Brochtoad: Bugfixes for compile time problems using libftdi1 64/45964/3
2013-03-21 Todd Brochhdctools: Remove deprecated servod & miniservod binaries. 63/45963/2
2013-03-18 J. Richard... Add a get_board() method to servod. 21/45621/3 stabilize-3881.0.B
2013-03-14 Simran BasiServo: V3: Allow for non-FTDI Interfaces 68/45368/2 factory-spring-3842.B
2013-03-13 Richard BarnetteRevert "Servo: V3: Allow for non-FTDI Interfaces" 64/45364/2
2013-03-13 Simran BasiServo: V3: Allow for non-FTDI Interfaces 48/45248/4
2013-03-06 David SchneiderInclude libusb.h when using libftdi1. 54/41654/5 firmware-spring-3824.4.B firmware-spring-3824.55.B firmware-spring-3824.84.B firmware-spring-3824.B
2013-03-06 Tom Wai-Hong Tamhdctools: servod: Support a new control to send multipl... 65/44165/4
2013-02-27 J. Richard... Tell the kernel to re-read the GPT after writing the... 34/44134/2
2013-02-21 Rong Changhdctools: update hwinit list before checking clobber_ok 00/41700/2
2013-02-19 Vadim BendeburyDo not leave open files behind after uart capture stops 78/43478/2
2013-02-14 Todd Brochhdctools: servod: spring ADCs for power measurement. 41/42841/6
2013-02-14 J. Richard... First cut refactoring for client API 34/43134/4
2013-02-13 Todd Brochservod: spring: Add daisy EC controls. 86/43186/3
2013-02-13 Vadim BendeburyAdd ability to capture uart channels 83/43083/5
2013-02-12 Todd Brochhdctools: servod: mcCroskey ADCs for power measurement. 65/42965/4 release-R26-3701.B stabilize-3701.30.0 stabilize-3701.30.0b stabilize-3701.46.B stabilize-3701.81.B toolchain-3701.42.B
2013-02-08 Vadim BendeburyMove UART support to PTY driver 54/42454/5 stabilize-bluetooth-smart
2013-02-06 Vadim BendeburyXMLRPC functions must return a value 94/42794/2
2013-02-05 Vadim BendeburyDo not prevent servod startup on initialization failures 53/42453/3
2013-02-01 Todd Brochhdctools: servod: Link sense resistor changes. 56/42356/2 stabilize-3658.0.0
2013-01-31 Todd Brochhdctools: pty_driver: refactor _issue_cmd method. 72/42172/4
2013-01-25 Vadim BendeburyMake servod report all valid control values in case... 84/41984/3
2013-01-23 Vadim BendeburyDo not reorder arguments when values are assigned 78/41778/3
2013-01-22 Rong Changhdctools: Set Parrotflex spi1_vref to pp3300 by default 92/38292/3
2013-01-18 Vadim BendeburyAdd debug printouts of the UART channel output 89/41589/2
2013-01-17 Vadim BendeburyIncrease default UART timeout 68/41568/2
2013-01-17 Vadim BendeburyAllow partial control names for dut-control get requests 24/41424/4
2013-01-16 Vadim BendeburyAdd some structure to dut-control output 09/41409/2
2013-01-09 Todd Brochhdctools: flip fw_up and rec_mode for Alex/Lumpy systems. 32/39932/4 factory-3536.B
2013-01-08 Todd Brochhdctools: servod: Add lid control for daisy. 65/40265/4
2012-12-19 Todd Brochhdctools: servod: spring ADCs for power measurement. 81/39881/4
2012-12-19 Todd BrochRevert "hdctools: servo V2: Fix fw_up and rec_mode... 25/39925/2
2012-12-10 David SchneiderAdd Toad, the USB micro dev companion. 06/39106/4 release-R25-3428.B stabilize-3428.110.0 stabilize-3428.149 stabilize-3428.149.B stabilize-3428.193 toolchain-3428.65.B
2012-12-10 Todd Brochhdctools: servod: Add sid for next batch of servo V2 93/39493/2
2012-12-10 Todd Brochhdctools: servo V2: Fix fw_up and rec_mode GPIOs. 17/39417/2
2012-12-06 Todd Brochhdctools: servod: clarify errors during hwinit 00/38400/5 stabilize2
2012-12-06 Todd Brochhdctools: servod: make hwinit follow order of xml parsing 64/39264/3
2012-11-19 Richard BarnetteFix beaglebone deployment based on recent testing. 36/38236/2
2012-11-15 Todd Brochhdctools: servod: Make board overlays independent of... 57/37957/7
2012-11-13 Todd Brochhdctools: servod: Display log of all XML files sourced. 59/37859/2
2012-11-13 Vincent Palatinhdctools: select the right flex configuration for Spring 51/37851/2
2012-11-12 Tom Wai-Hong Tamhdctools: servo: Include 50-pin servoflex config on... 93/37693/2
next